Toyota Tacoma Key Fob Battery Replacement

1998-2015 Models

This vehicle has multiple key fob types. Select your key below.
Most Common

Smart Key Fob (2015)

1998-2015 Toyota Tacoma Smart Key Fob (2015)
Battery Type
CR2032
Buy CR2032 on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
Toyota Tacoma Smart Key Fob (2015) Battery Replacement Video
FCC ID: HYQ14FBA, HYQ14FBB
Replacement Steps for Smart Key Fob (2015)
Open the Outer Case Use a pry tool in the small cutout at the bottom of the fob to pop the case open
Access the Electronics Remove the internal electronics pack. There is a small slot on the side of this pack (labeled "use coin") where you can use your screwdriver to gently pry it open
Remove the Old Battery Flip the circuit board over to find the battery. Use your pry tool to pop the CR2032 battery out from the top
Install the New Battery Slide the new battery in and push down until it snaps into place
Alternative

Remote Key Fob (2011–2015)

1998-2015 Toyota Tacoma Remote Key Fob (2011–2015)
Battery Type
CR2032
Buy CR2032 on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
Toyota Tacoma Remote Key Fob (2011–2015) Battery Replacement Video
FCC ID: GQ43VT20T
Replacement Steps for Remote Key Fob (2011–2015)

Tools needed: Small flathead screwdriver

Open the case Fit a small flathead screwdriver into the notch and twist gently until the halves separate. Work along the edge instead of forcing one spot.
Take out the old battery Note which way the CR2032 faces, then lift it out with a fingernail or a small screwdriver tip.
Fit the new battery Put the new CR2032 in with the positive (+) side facing up, and press it flat into its holder.
Close it up and test Line up the halves and press until they click, then try lock and unlock from a few feet away.
Alternative

Remote Head Key (2015)

1998-2015 Toyota Tacoma Remote Head Key (2015)
Battery Type
CR2016
Buy CR2016 on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
FCC ID: HYQ12BDP
Replacement Steps for Remote Head Key (2015)
Locate the release button on the back of your key fob. Press it to slide out the emergency metal key blade.
Use the key blade as a pry tool. Insert it into the seam along the edge of the fob and gently twist to separate the two halves of the case.
Remove the old battery. Note the orientation — the positive (+) side typically faces up. A small flathead screwdriver can help pop it out.
Insert the new battery with the positive (+) side facing the same direction as the old one. Press firmly until it clicks into place.
Snap the case back together. Align both halves and press around the edges until you hear it click shut. Slide the emergency key back in.
Test all buttons — lock, unlock, trunk, and panic — to confirm the new battery is working properly.
Alternative

Smart Key Fob (2005–2010)

1998-2015 Toyota Tacoma Smart Key Fob (2005–2010)
Battery Type
CR2032
Buy CR2032 on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
Toyota Tacoma Smart Key Fob (2005–2010) Battery Replacement Video
FCC ID: GQ43VT20T
Replacement Steps for Smart Key Fob (2005–2010)
Open the Outer Case Use a pry tool in the small cutout at the bottom of the fob to pop the case open
Access the Electronics Remove the internal electronics pack. There is a small slot on the side of this pack (labeled "use coin") where you can use your screwdriver to gently pry it open
Remove the Old Battery Flip the circuit board over to find the battery. Use your pry tool to pop the CR2032 battery out from the top
Install the New Battery Slide the new battery in and push down until it snaps into place
Alternative

Key Fob (1998–2006)

1998-2015 Toyota Tacoma Key Fob (1998–2006)
Battery Type
23A
Buy 23A on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
Toyota Tacoma Key Fob (1998–2006) Battery Replacement Video
FCC ID: ELVATDD / ELVAT1B
Replacement Steps for Key Fob (1998–2006)

Tools needed: Small flathead screwdriver

Open the case Fit a small flathead screwdriver into the notch and twist gently until the halves separate. Work along the edge instead of forcing one spot.
Take out the old battery Note which way the battery faces, then lift it out with a fingernail or a small screwdriver tip.
Fit the new battery Put the new battery in with the positive (+) side facing up, and press it flat into its holder.
Close it up and test Line up the halves and press until they click, then try lock and unlock from a few feet away.
Alternative

Key Fob (2002–2004)

1998-2015 Toyota Tacoma Key Fob (2002–2004)
Battery Type
CR2016
Buy CR2016 on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
Toyota Tacoma Key Fob (2002–2004) Battery Replacement Video
FCC ID: HYQ12BBX, HYQ12BAN, HYQ1512Y, GQ43VT14T, HY12BAN
Replacement Steps for Key Fob (2002–2004)

Tools needed: Small flathead screwdriver

Open the case Fit a small flathead screwdriver into the seam between the two halves and twist gently until the halves separate. Work along the edge instead of forcing one spot.
Take out the old battery Note which way the CR2016 faces, then lift it out with a fingernail or a small screwdriver tip.
Fit the new battery Put the new CR2016 in with the positive (+) side facing the same way as the old one, and press it flat into its holder.
Close it up and test Line up the halves and press until they click, then try lock and unlock from a few feet away.

Frequently Asked Questions

What battery does a Toyota Tacoma key fob use?

It depends on the key: the Smart Key Fob (2015) uses a CR2032; the Remote Key Fob (2011–2015) uses a CR2032; the Remote Head Key (2015) uses a CR2016; the Smart Key Fob (2005–2010) uses a CR2032; the Key Fob (1998–2006) uses a 23A; the Key Fob (2002–2004) uses a CR2016. All are 3-volt lithium coin batteries, available at most grocery stores, pharmacies, and online retailers.

How do I know if my Toyota Tacoma key fob battery is dying?

Signs your Toyota Tacoma key fob battery is dying include: reduced range (having to get closer to unlock), intermittent button response, delayed unlocking, the low battery warning on your dashboard, or buttons requiring multiple presses to work.

How long does a Toyota Tacoma key fob battery last?

A Toyota Tacoma key fob battery typically lasts 2-4 years depending on usage. Frequent use, extreme temperatures, and proximity to electronic devices can shorten battery life.

Can I replace my Toyota Tacoma key fob battery myself?

Yes, replacing a Toyota Tacoma key fob battery is a simple DIY task that takes under 5 minutes. You only need a new CR2032, CR2016 or 23A battery and optionally a small flathead screwdriver. No dealer visit or programming is required.

Do I need to reprogram my key fob after replacing the battery?

No, you do not need to reprogram your Toyota Tacoma key fob after replacing the battery. The fob retains its programming during battery changes. Simply insert the new battery and test the buttons.

Where can I buy a CR2032, CR2016 or 23A battery?

CR2032, CR2016 or 23A batteries are available at Walmart, Target, CVS, Walgreens, Amazon, auto parts stores like AutoZone and O'Reilly, and most grocery stores. They typically cost $6-12 for a 2-pack.