Mercury Grand Marquis Key Fob Battery Replacement

2011 Models

Most Common

Remote Key Fob

2011 Mercury Grand Marquis Remote Key Fob
Battery Type
CR2032
Buy CR2032 on Amazon
✓ OEM Compatible
✓ Free Prime Shipping
Mercury Grand Marquis Remote Key Fob Battery Replacement Video
FCC ID: CWTWB1U331, CWTWB1U311, CWTWB1U322, CWTWB1U345
Replacement Steps for Remote Key Fob

Tools needed: Small flathead screwdriver

Open the case Fit a small flathead screwdriver into the seam between the two halves and twist gently until the halves separate. Work along the edge instead of forcing one spot.
Take out the old battery Note which way the CR2032 faces, then lift it out with a fingernail or a small screwdriver tip.
Fit the new battery Put the new CR2032 in with the positive (+) side facing up, and press it flat into its holder.
Close it up and test Line up the halves and press until they click, then try lock and unlock from a few feet away.

Frequently Asked Questions

What battery does a Mercury Grand Marquis key fob use?

The 2011 Mercury Grand Marquis key fob uses a CR2032 3-volt lithium coin battery. This is a standard battery available at most grocery stores, pharmacies, and online retailers.

How do I know if my Mercury Grand Marquis key fob battery is dying?

Signs your Mercury Grand Marquis key fob battery is dying include: reduced range (having to get closer to unlock), intermittent button response, delayed unlocking, the low battery warning on your dashboard, or buttons requiring multiple presses to work.

How long does a Mercury Grand Marquis key fob battery last?

A Mercury Grand Marquis key fob battery typically lasts 2-4 years depending on usage. Frequent use, extreme temperatures, and proximity to electronic devices can shorten battery life.

Can I replace my Mercury Grand Marquis key fob battery myself?

Yes, replacing a Mercury Grand Marquis key fob battery is a simple DIY task that takes under 5 minutes. You only need a new CR2032 battery and optionally a small flathead screwdriver. No dealer visit or programming is required.

Do I need to reprogram my key fob after replacing the battery?

No, you do not need to reprogram your Mercury Grand Marquis key fob after replacing the battery. The fob retains its programming during battery changes. Simply insert the new battery and test the buttons.

Where can I buy a CR2032 battery?

CR2032 batteries are available at Walmart, Target, CVS, Walgreens, Amazon, auto parts stores like AutoZone and O'Reilly, and most grocery stores. They typically cost $6-12 for a 2-pack.